Products

China Hydraulic Concrete Block Making Machine Manufacturer, Supplier, Factory

When searching for dependable and high-performance Concrete Block Machines, hydraulic systems stand out for their superior compaction force and production consistency. This category of equipment leverages fluid pressure to form solid blocks, hollow units, pavers, and curbstones with exceptional density and uniform dimensions. Unlike mechanical or manual alternatives, modern hydraulic Concrete Block Making Machinery delivers precise control over vibration intensity, mold movement, and demolding cycles, which directly translates into higher throughput and reduced waste. For operations aiming to scale up without compromising product quality, integrating a Fully Automatic Block Making Machine eliminates manual feeding and handling bottlenecks, while the broader category of Fully Automatic Block Making Machinery can seamlessly connect to batching plants, color dosing units, and cubing systems to create a turnkey production line.


This Hydraulic Concrete Block Making Machine is engineered for continuous, heavy-duty operation in both medium and large-scale manufacturing environments. The frame is fabricated from high-strength treated steel to absorb intense vibration without deformation over years of service. A dual-axis synchronous hydraulic system powers the mold table and head, ensuring even pressure distribution across the entire pallet area. The programmable logic controller with a touchscreen interface allows operators to store multiple recipes and fine-tune parameters such as vibration frequency, feeding time, and pressing pressure without mechanical adjustments. Quick-change mold sets enable rapid product switches between standard blocks, interlocking pavers, and insulation blocks, greatly enhancing production flexibility. Every cycle is monitored by position sensors and pressure transducers that feed real-time data to the control panel, guaranteeing repeatable block height and strength. The automated pallet feeder and block conveyor reduce manual labor to a supervisory role, while the integrated hydraulic power pack optimizes energy consumption by using only the necessary flow rate during each phase.

  • Hydraulic pressing force: 120–180 kN, adjustable in 5 kN increments
  • Vibration system: twin 3.7 kW motors with frequency converter (0–65 Hz)
  • Mold vibration time: 0.5–5 seconds programmable per production step
  • Hydraulic tank capacity: 400 liters with oil temperature and level monitoring
  • Control system: Siemens PLC with 7-inch color HMI, remote diagnostic capability
  • Production rate: up to 9 pallets per minute (2-blocks-per-drop configuration)
  • Compact pallet size: 1100 x 750 mm, wooden or plastic pallet compatible
ParameterSpecification
Overall dimensions (L x W x H)5200 x 2300 x 2800 mm
Total installed power45 kW (380 V, 50 Hz, 3-phase)
Max block height300 mm
Mold mounting plate size1050 x 700 mm
Hydraulic pump flow rate63 L/min at 210 bar
Weight (approx.)12,500 kg
Noise level≤ 82 dB(A)
Pallet accumulation capacity12 pallets (automatic stacker optional)

Related Products

Hot Products

  • Block Making Machinery

    Block Making Machinery

    QGM/Zenith, a reputable manufacturer in China, is willing to offer you 844SC Block Making Machinery. We promise to provide you with the best after-sale support and prompt delivery.This equipment not only utilizes waste resources such as slag, slag, construction waste, etc., realizes the recycling of resources, but also protects land resources. Block Making Machinery usually consists of a series of components, including hoppers, agitators, molds, vibrators and conveyor belts.
  • Automatic Paving Brick Making Machine

    Automatic Paving Brick Making Machine

    The Zenith 844 German Automatic Paving Brick Making Machine is designed and made in Germany. It mainly focuses on the paving stone production with gorgeous features like: Fully automatic and Multi-layer production, pallet-free (saving vast cost on pallet),visualized menu navigation, touch operation panel, products ranging from 50mm-500mm in height.
  • Fully Automatic Simple Brick Production Line

    Fully Automatic Simple Brick Production Line

    QGM Block Machine is Fully Automatic Simple Brick Production Line manufacturer and supplier in China. The automated brick machine production line is a manufacturing process that uses automated machinery and equipment to produce bricks. The production process usually involves a series of steps such as raw material preparation, molding, drying, firing, and packaging. Automatic machines and conveyor belts are used to move the raw materials and finished products through each stage of the process.
  • Concrete Block Machine

    Concrete Block Machine

    QGM/Zenith is one of prominent manufacturer, producer, and exporter of Concrete Block Machine in China.ZN1200S Concrete Block Machine mainly mixes cement, sand, pebbles and other raw materials, and then presses and forms them to form block bricks with certain strength and specifications.
  • Brick Stacking Machine

    Brick Stacking Machine

    The Brick Stacking Machine is a piece of smart brick-stacking equipment designed using patented technology that employs a palletizing pattern with pre-set spacing. This system was developed to address the limitations of basic block production lines—specifically the reliance on manual labor for stacking finished bricks, which entails high physical exertion and low efficiency, as well as the need for mechanized loading and unloading of finished products. Typically, the system is installed independently near the product curing yard to stack cured products on-site; alternatively, it can be integrated directly into the block production line to enable in-line palletizing.
  • Mobile Solid Waste Brick Production Line

    Mobile Solid Waste Brick Production Line

    Mobile Solid Waste Brick Production Line is a combination of equipment used to produce blocks, which usually includes equipment such as mixers, crushers, metering machines, mixers, vibrating tables, automatic cutting machines and automatic stackers.
  • Related Blog
  • Reviews

  • Why Are Concrete Blocks of Poor Quality? 7 Common Causes and How QGM Block Machines Solve Them

    The quality of finished concrete blocks is determined long before the products leave the curing yard. From raw material preparation and vibration efficiency to hydraulic pressure and intelligent process control, every stage of concrete block manufacturing influences the final strength, dimensional accuracy and appearance of each block.

  • Working Principle of Concrete Block Machine

    Concrete block machine uses cement, sand and other raw materials. It has the advantages of high hollow rate, good quality, low cost and not easy to weather. It does not use clay, does not compete with farmland, does not use fuel, saves energy, uses cliff stones by mountains, uses sand and gravel by rivers, and uses industrial waste slag by urban industrial and mining.

  • A delegation from the Quanzhou Federation of Enterprises and Entrepreneurs visited Quangong Machinery Co., Ltd.

    Recently, Lin Boqian, Chairman of the Quanzhou Federation of Enterprises and Entrepreneurs, and his delegation visited Fujian Quangong Co., Ltd. (hereinafter referred to as "Quangong Co., Ltd.") to visit and inspect, gain an in-depth understanding of the company's innovative development achievements, and discuss new paths for high-quality development of the intelligent equipment manufacturing industry. Fu Huabin, Deputy General Manager of Quangong Co., Ltd., and company executives accompanied and received the entire process.

  • Hu Youyi, President of China Sand and Gravel Association, visited QGM Group for research and guidance

    On August 6, 2023, Hu Youyi, President of China Sand and Gravel Association, Zhao Jing, Deputy Secretary General of China Sand and Gravel Association, Lin Chen, Secretary General of Fujian Sand and Gravel Association, and Zhang Liantao, Part-time Deputy Secretary General of China Sand and Gravel Association, and other parties came to Quangong Company Limited (hereinafter referred to as QGM) for investigation and research.

  • The International Import Expo, Share the Future丨Zenith brick machine made a stunning appearance.

    The 6th China International Import Expo (hereinafter referred to as the “Expo”) concluded successfully from November 5th to November 10th. The theme of the exhibition is “New Era, Sharing the Future”, more than 3,400 enterprises from 128 countries and regions participated in the exhibition, the world’s top 500, industry leading enterprises and innovative small and medium-sized enterprises are the largest number ever.

  • QGM-Zenith Showed on 2022 28th Kazakhstan International Construction Exhibition

    From September 7th to 9th, 2022, the 28th Kazakhstan International Construction Exhibition was successfully held at the Atakent Exhibition Center. As an internationally renowned manufacturer of concrete block-making machines, QGM Zenith Group was invited to attend. We are also the only Chinese block-making machine manufacturer who was invited to this exhibition.

Related Search

Hydraulic Concrete Block Making Machinery

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.Privacy Policy
RejectAccept