Autoclaved Lightweight Concrete

Autoclaved Lightweight Concrete is revolutionizing modern construction, and maintaining the machinery behind its production is critical. Our integrated support includes specialized solutions like the Brick machine maintenance room, which keeps block-forming equipment running at peak performance. For mixed-material lines, the Concrete brick machine maintenance room addresses wear from abrasive aggregates. We also engineer the Block machine maintenance room for high-volume AAC block production, and offer the Brick machine maintenance room for sale as a ready-to-deploy asset for facility upgrades.

Autoclaved Lightweight Concrete delivers a unique combination of thermal efficiency, fire safety, and dimensional accuracy. Below are key specifications that define this advanced building material.

Dry density range of 400–600 kg/m³, slashing dead loads on structures
Thermal conductivity values from 0.10 to 0.16 W/(m·K) for exceptional energy savings
Non-combustible Class A1 rating with fire resistance exceeding 4 hours
Sound reduction index up to 50 dB without additional insulation layers
Precision-cut blocks and panels minimize on-site waste and mortar usage
100% recyclable composition with zero hazardous emissions during service life

Parameter	Specification
Compressive Strength	2.5 – 5.0 MPa (cube test)
Modulus of Elasticity	1.5 – 2.5 kN/mm²
Drying Shrinkage	≤ 0.5 mm/m
Water Absorption	8 – 12% by volume
Standard Block Dimensions	600 x 200 x 100 mm (custom sizes available)
Reinforced Panel Length	Up to 6,000 mm
Airborne Sound Insulation	Rw 40 – 50 dB (100 mm thickness)
Fire Resistance Period	240 minutes (100 mm wall)
Thermal Diffusivity	0.28 – 0.35 mm²/s
Frost Resistance	≥ 50 freeze-thaw cycles

Hot Products

ZN900-2C Fully Automatic Block Making Machine
The ZN900-2C Fully Automatic Block Making Machine is the latest top-tier intelligent production equipment developed by Zenith. It can produce various standard concrete products such as hollow blocks, paving stones, curbstones, solid bricks, as well as a wide range of non-standard special products and landscaping products—virtually meeting all customer requirements.
The ZN900-2C is also equipped with several cutting-edge intelligent systems and devices, such as the latest control and automatic diagnostic systems and a servo vibration system.
Automatic Concrete Block Making Machine
The producers of QGM/Zenith in China offer high-quality products, you are welcome to purchase straight high-quality Zenith-1500-2 Automatic Concrete Block Making Machine at a good price.Automatic Concrete Block Making Machine is a professional brick making machine used to produce new wall material blocks.
Brick Manufacturing Machine
You can purchase ZN1200C Brick Manufacturing Machine from QGM/Zenith with confidence, as we are a proficient producer of high-quality Brick Manufacturing Machine. We promise to provide you with the best after-sale service and prompt delivery.
Retaining Wall Block Mold
QGM/Zenith is one of professional China Retaining Wall Block Mold manufacturer and supplier, consult us now! QGM retaining wall block mould adopts low carbon allay high strength carburizing steel, hardness reaches 60-63HRC,combined withadvanced welding and processing technology , clearance 0.8-1mm, which make the mould strong and durable.Meanwhile, mould platesand spare parts can be easily replaced.
Interlocking Block Brick Making Machine
QGM/Zenith is a proficient manufacturer and supplier of ZN900CG Interlocking Block Brick Making Machine in China. As a machine designed in Germany and made in China, ZN900CG meets with the European Standard well. ZN900CG can be seen as the pro version on ZN900C.Equipped with Quick Mould Change, Italian GSEE Encoder, Italian Hydraulic System, European Standard machine for better performance.There are 2×12.1KW servo vibration motors in the bottom, 2×0.55KW vibrators on top vibration, to achieve 100 KN vibration force. The product height can range from 40mm to 300mm.
Block Brick Making Machine
QGM/Zenith invites you to visit our factory to purchase the newest, affordable, and high-quality HP-1200T Block Brick Making Machine. We are looking forward to working with you.

Related Blog
Reviews

Quangong Machinery Co., Ltd. Successfully Concludes Q2 Improvement Proposal Lucky Draw
Since the launch of this quarter's initiative, all employees have actively engaged in workplace improvements. Drawing on their practical experience, they focused on key areas such as process optimization, workflow streamlining, equipment efficiency enhancement, cost and consumption reduction, quality improvement, and on-site management.
Mr. Liu Min, Deputy Director-General of the Bureau of Private Economy at the National Development and Reform Commission (NDRC), and his delegation visited Quangong Machinery Co., Ltd. for an inspection and research tour.
To gain firsthand insight into the current state of private enterprise development and to foster the high-quality growth of the private sector, Liu Min—Deputy Director of the Bureau of Private Economy at the National Development and Reform Commission (NDRC)—recently led a delegation to visit Quangong Machinery Co., Ltd. for an inspection and research tour.
QGM Invites You to China International Concrete Expo 2026
China International Concrete Expo 2026 (CICE 2026) will take place from September 18 to 20, 2026, at Area D of the China Import and Export Fair Complex (Canton Fair Complex), Guangzhou.
Complete Block Machine Lifecycle Support: How QGM Helps Manufacturers Maximize Production Performance
Purchasing an automatic block making machine is a major investment for any concrete products manufacturer. However, achieving long-term production success depends on much more than equipment specifications, production capacity, or initial installation.
Bauma 2025 kicked off in Munich, Germany | Quangong Machinery Co., Ltd. - Zenith ZN2000-2 fully automatic equipment demonstrates a new height of intelligent manufacturing
On April 7, 2025, local time in Germany, the world-renowned bauma 2025 (Munich International Construction Machinery, Building Materials Machinery, Mining Machinery, Engineering Vehicles and Construction Equipment Exhibition) opened grandly in Munich, Germany.
QGM Digital Twins
“Digital Twins” means that copy a real block making production line in a digital method, which simulates the actions and movements of the production line in the real world. It is the virtual reality of design, crafts, manufacture, and the whole block production line so as to realize the effect of a “dark factory” which can boost R&D and manufacture efficiency, forecast malfunction, reduce production costs, and save the loss, etc.

Web Menu

Product Search

Language

Exit Menu

Autoclaved Lightweight Concrete

Related Products

Hot Products

ZN900-2C Fully Automatic Block Making Machine

Automatic Concrete Block Making Machine

Brick Manufacturing Machine

Retaining Wall Block Mold

Interlocking Block Brick Making Machine

Block Brick Making Machine

Quangong Machinery Co., Ltd. Successfully Concludes Q2 Improvement Proposal Lucky Draw

Mr. Liu Min, Deputy Director-General of the Bureau of Private Economy at the National Development and Reform Commission (NDRC), and his delegation visited Quangong Machinery Co., Ltd. for an inspection and research tour.

QGM Invites You to China International Concrete Expo 2026

Complete Block Machine Lifecycle Support: How QGM Helps Manufacturers Maximize Production Performance

Bauma 2025 kicked off in Munich, Germany | Quangong Machinery Co., Ltd. - Zenith ZN2000-2 fully automatic equipment demonstrates a new height of intelligent manufacturing

QGM Digital Twins

Fay 2025-05-28 01:45:13

Sally 2025-07-02 04:53:39

Nana 2025-10-04 09:40:16

Ina 2025-09-29 20:46:20

Eric 2025-05-11 07:07:12

Juliet 2025-09-27 21:48:36

Send Inquiry