block mould machinery equipment

Brick machine mixer is a type of equipment used in brick making or construction work. It is used to mix various materials such as cement, sand, water, and additives to form a uniform and consistent mixture. Brick machine mixer comes in different sizes and capacities, ranging from small portable mixers for small construction projects to large stationary mixers for big commercial projects.

Zenith 940 Mobile Laying Brick Machine is completely made in Germany. Excellent features like multi layer production, product height from 50 mm and even up to 1,000 mm used for landscaping, making the Zenith 940 be a true all-around and highly efficient automatic block machine. On the whole, German Zenith 940 is fit for special products which can’t be produced by single pallet equipment.

A solid brick forming machine is a specialized piece of equipment used to continuously produce high-density solid bricks from raw materials such as cement, fly ash, slag, or clay through vibration compression or vacuum extrusion processes. Solid brick forming machines are mainly divided into two categories: hydraulic vibration forming (for non-fired bricks) and vacuum extrusion forming (for sintered bricks). They are specifically designed for manufacturing high-strength solid bricks, blocks, and other load-bearing structural building materials. This equipment uses hydraulic static pressure forming technology, compacting a mixture of cement, sand, gravel, and construction waste in a mold using a 32MPa high-pressure system, ensuring a brick density ≥95% and a compressive strength of MU20 or higher. A dual-axis synchronous vibration device eliminates internal air bubbles at a frequency of 3000 times/minute; the rapid demolding system uses a hydraulic ejection structure, with a demolding time ≤5 seconds.

QGM/Zenith is one of professional China Concrete Block Making Machine manufacturer and supplier, if you are looking for the ZN1000C Concrete Block Making Machine, consult us now! The block bricks produced have the advantages of high hollow rate, good quality, low cost, and not easy to weather.

The Brick Stacking Machine is a piece of smart brick-stacking equipment designed using patented technology that employs a palletizing pattern with pre-set spacing. This system was developed to address the limitations of basic block production lines—specifically the reliance on manual labor for stacking finished bricks, which entails high physical exertion and low efficiency, as well as the need for mechanized loading and unloading of finished products. Typically, the system is installed independently near the product curing yard to stack cured products on-site; alternatively, it can be integrated directly into the block production line to enable in-line palletizing.

Being a proficient manufacturer, QGM/Zenith aims to offer you top-notch Automatic Brick Free Machine. We promise to provide you with the best after-sale support and prompt delivery.