Automatic block mould machine

When searching for reliable equipment in the concrete production industry, a high-quality block mould machine is fundamental for achieving consistent output. Modern facilities often upgrade to full-scale block mould machinery to enhance structural integrity and cycle speed. For large-volume manufacturing, investing in Automatic block mould machinery reduces manual intervention and ensures tight tolerances. The latest advancement is the Intelligent block mould machine, which integrates adaptive pressure sensing and real-time diagnostics to minimize material waste.

The Automatic block mould machine is engineered with a heavy-duty steel frame and a hydraulic compression system rated at 25 MPa. Its vibration unit employs six variable-frequency motors that deliver 4,200 rpm for dense compaction. The mold carriage is guided by linear rails, achieving a positioning accuracy of ±0.3 mm. Below is a breakdown of core technical specifications:

• Production capacity: 1,200–1,800 blocks per hour
• Mold change time: 12 minutes with quick-clamp system
• Power rating: 38 kW, 380V/50Hz three-phase
• Hydraulic pump flow: 110 L/min
• Control interface: 10-inch HMI with recipe storage
• Vibration force: 72 kN adjustable in three stages
• Pallet size compatibility: 1,100×700 mm to 1,400×900 mm
• Noise level: below 82 dB(A) at full load

The feeding system on this unit uses a belt conveyor with a load-cell batching gate, achieving mix uniformity within 1.5 percent deviation. The upper ram and lower table move independently through closed-loop servo control, which lets operators fine-tune block height from 50 mm to 300 mm without switching molds. Maintenance access is simplified by side panels that swing open, and the central lubrication block automatically greases 24 points every 5,000 cycles. Smart sensors monitor oil temperature, clamping force, and vibration amplitude, triggering alerts through the dashboard when readings drift beyond preset bands. Cold-weather packages are available with heated hydraulic tanks and insulated electrical cabinets, tested for reliable startup at minus 10 degrees Celsius.