auto brick machine

In modern masonry and infrastructure projects, investing in a high-performance brick machine automatic dramatically reduces cycle times and labor dependency. Our lineup centers on the advanced automatic cement brick machine, which uses precision hydraulic pressing to achieve uniform density in every block. For operations requiring flexible mold changes and high daily output, the robust brick making machine handles both hollow and solid bricks with minimal material waste. Large-scale construction sites frequently rely on our integrated brick building machine to maintain continuous production schedules and strict dimensional tolerances.

The Auto Brick Machine incorporates a Siemens PLC-controlled vibration and hydraulic system, delivering consistent compression force across the mold chamber. Its modular pallet conveyor and automatic stacker enable hands-free operation from raw material feeding to cured brick cubing. With quick-change mold sets, the station can switch between standard clay bricks, paver blocks, and hollow core units in under 15 minutes. Double-axis synchronous vibration motors and a heavy-duty welded frame ensure that even high-cycle runs produce bricks with compressive strength exceeding 25 MPa. An intelligent panel allows operators to fine-tune vibration frequency, pre-load pressure, and demolding speed, making the machine adaptable to different soil, fly ash, and cement ratios without sacrificing cycle time.

Core Parameter Overview

• Hydraulic working pressure: 21–25 MPa, with overload protection valve
• Integrated vibration force: 50–75 kN per motor, dual synchronized drive
• Mold changeover time: under 12 minutes for single-operator setup
• PLC memory capacity: 30 recipe presets for distinct brick heights and compaction levels
• Water-cooled power pack maintains oil temperature below 55°C in continuous operation
• Pallet feeding: automatic magazine with anti-jam sensor, supports 1,200×950 mm steel pallets
• Installed electrical load: 22–38 kW depending on the concrete mixer integration
• Noise level: ≤75 dB(A) at operator position when fully enclosed
• Steel structure: Q345B welded, stress-relieved base frame with 8 vibration isolation pads
• Control interface: 10-inch HMI touchscreen with remote diagnostic port

Model Performance Matrix

Pallet Circulation & Stacking Data

The heavy-gauge mold carriage runs on hardened linear guides, reducing side clearance to 0.15 mm for cleaner demolding. Proportional hydraulic valves on the Auto Brick Machine deliver ramped pressure profiles that virtually eliminate lamination cracks. Staggered vibrator timing and adjustable pan inclination keep green brick density within ±2% across the entire pallet surface. Wet-side sensors continuously track moisture content in the hopper, regulating the dosing screw speed to maintain an optimal water-cement ratio between 0.38 and 0.45 during automatic batch cycling.